Electrical demands rise significantly in the winter as homeowners hang holiday lights, run more appliances, and spend more time indoors. They might throw in a space heater and plug in a few extra appliances to keep cooked meals warm. Some people also make do with undesirable solutions like daisy-chained extension cords and power strips. Likewise, winter power outages create further risks.
It is important to know the signs of a safety issue with a home electrical system, especially in the winter months. Here is a look at how to make sure your electrical system will be as safe as possible this winter.
Avoid Overloading Circuits and Power Strips
One of the biggest problems with electricity in the winter is that the most overloaded circuits are often in rooms with the weakest circuit breakers. Most living rooms, for example, have a 15-amp breaker. They often share this circuit with adjacent rooms and hallways, too.
That’s not a big deal for a living room with the typical modern amenities. A few lamps, a TV, and a couple of phone chargers aren’t going to come close to maxing out a 15-amp circuit. Throw an electric space heater into the mix, though, and the odds of tripping that breaker go up significantly.
Also, bear in mind that moving the plug across the room likely won’t help. Most living rooms share a single breaker, so the plug is still on the same circuit. People also make the mistake of assuming power strips add capacity, but they only spread the circuit’s existing capacity.
The solution isn’t as simple as putting in a bigger breaker, either. The wiring in the wall needs to match the breaker’s capacity. Otherwise, there is a risk that the insulation on the wiring will melt and create a fire hazard inside your home’s walls.
If you see circuit breakers tripping, have one of our electricians assess the problem. A breaker tripping is not an inconvenience but a sign that something is overtaxing the circuit. We can determine if the breaker is the problem or if something else, like a faulty appliance, tripped the breaker. If upgrades are necessary, we can tell you whether you might need a new panel, a new breaker, or new wiring.
Use Space Heaters Safely
Supplemental heating is a common solution when families don’t want to pay extra to heat their whole house. The problem is that space heaters frequently run at around 1,500 watts, which means a single one consumes most of a 15-amp circuit’s capacity. This can lead to damage that often appears first at the plug, so inspect the cord and plug each use beforehand. If the cord appears yellowed or frayed, don’t use the heater.
Keep your space heater on a level surface, even if it includes a tip-over stopping mechanism. Keep kids and pets away from the heater. Make sure you use a space heater certified by a respected lab, such as UL. Keep the heater at least three feet away from bedding, curtains, and furniture. If a room is consistently cold enough that it requires supplemental heating all the time, consider talking with an HVAC technician.
Inspect Cords, Holiday Lights, and Outdoor Connections
Especially with holiday light displays going up, there are cords seemingly everywhere this time of year. The opportunities for damaged insulation, plugs, and sockets abound. Also, people frequently make the mistake of not using outdoor-rated light strings for outdoor displays. You should also check the manufacturer’s specifications for how many strings you can put in a row because there is a risk of overheating the ones early in the sequence.
Keep your cords away from pinch points like doorways. Also, running them under rugs encourages heat to build. Make sure you only connect your outdoor cords to GFCI outlets since it only takes one wet day to wreck an entire circuit.
Lastly, treat your outdoor displays as temporary. Yes, it is a pain putting them back up each year. But disconnecting the decorations reduces the risk of damage to the circuit when the display is not in use.
Prepare for Winter Outages and Use Generators Correctly
Have flashlights and fresh batteries stationed throughout your house in positions where household members can find them. Avoid stumbling around in the dark, which is a major safety issue.
If you intend to use a portable generator, make sure you have long enough cords to keep it 20 or more feet away from any windows, doors, or vents. Carbon monoxide is colorless, odorless, and deadly, so the exhaust can poison your whole household. Connect appliances to the generator directly. Never backfeed a generator into a household wall outlet.
If you wish to use a standby generator, have a licensed electrician configure it. The job requires an approved transfer switch and proper wiring.
If you see a downed line outside, stay away from it. Report the problem to the electric company.
Check Smoke and Carbon Monoxide Alarms
Test your alarms every month. Also, keep track of when each one went up. Most models last seven to ten years, and you should replace them once they expire. Even if they have backup power systems, make sure the batteries are fresh.
Place a carbon monoxide alarm in any space with a fuel-burning system. This includes any room with a gas furnace, a boiler, or a fireplace. You should also have a CO detector on the side of the house where your generator is. If the alarm triggers, exit the house immediately and call 9-1-1.
Electrical Warning Signs You Should Never Ignore
You also need to know the warning signs that your electrical system system may not be weathering winter all that well. Repeated circuit breaker trips are a sign of trouble. So are burning smells near outlets, panels, switches, or devices. If you notice a discolored or unusually hot outlet cover, that’s a fire risk. The same goes for any sizzling, buzzing, crackling, or popping that you hear in the electrical system or the walls.
Check for plugs that never seat firmly when you set them in an outlet. Also, be careful when touching a connected device to avoid shock or tingling. And be wary of flickering or dimming, especially if it happens when a major system like the HVAC kicks on. Also, remember that devices like surge protectors don’t fix problems like overloaded circuits.
If you encounter any electrical hazard, stop using the affected outlet. Don’t access the panel or the wiring. If you see smoke or active arcing, exit the house immediately and call 911.
Bryant Heating, Cooling, Plumbing & Electric does electrical diagnostics and repairs in Kentucky, Ohio, and Indiana, so contact us now if you need service.